ABSTRACT
As the amount of ventilation required in buildings has increased to prevent the spread of COVID-19, the inflow of high humidity outside air in summer has increased the processing rate of latent heat loads as well as sensible heat loads. Accordingly, the ability to handle the latent heat load with low energy consumption has become important in order to maintain a comfortable indoor environment. In this study, a humidity control device composed of a desiccant rotor was designed and manufactured, and performance experiments were performed. Using an empirical formula obtained through experiments, a thermal environment simulation was conducted for a school classroom. Furthermore, a temperature-humidity control device that combines a desiccant rotor and heat pump was proposed, and the performance and energy consumption were analyzed by comparing it with the existing heat pump design. With conventional temperature control method using a heat pump, the average indoor relative humidity values in August were 65.7 %, which exceeds the set relative humidity range of 50 +/- 5 %. On the other hand, when using the temperature-humidity control device, the average indoor relative humidity values in August was 50.2 %, a more comfortable indoor environment than when using a conventional method. In addition, the energy consumption was reduced by 3 % compared to existing heat pump design.
ABSTRACT
Owing to the spread of COVID-19, the need for an inspection center that can quickly determine whether travelers using the airport are infected has emerged. For rapid determination, not only polymerase chain reaction tests but also antigen–antibody tests and on-site analysis systems are required. However, because it is time- and cost-intensive to construct a building that meets the standards for negative pressure facilities, modular negative pressure facilities are being installed as alternatives. Existing negative pressure facilities have problems such as increased energy consumption due to outdoor air load and condensation due to differences in indoor and outdoor temperatures and humidities caused by excessive external air inflow to achieve the target negative pressure and air change rate (ACH). In addition, owing to the installation of additional devices, additional construction is required to use them for other purposes in the future. To solve these problems, in this study, energy recovery ventilation (ERV) was employed to develop a heating, ventilation and air conditioning (HVAC) solution for the Incheon International Airport COVID-19 Testing Center. To shorten the development period, virtual product design (VPD) using computational fluid dynamics analysis-based design of experiments was performed. Owing to the application of VPD, the Incheon International Airport Modular COVID-19 Testing Center was completed in 2 weeks. The target pressure was measured in all spaces by applying the optimal conditions derived through VPD. In addition, owing to the application of ERV, the ACH of an airborne infectious isolation room exceeded the value suggested by international organizations.